Innovative Environmental Technologies, Inc. (IET) started a drilling services division in 2011 to address the environmental drilling needs of our clients. Since 2011, IET has dramatically expanded our drilling capabilities and can now service your drilling needs from any one of our six regional offices. IET Drillers hold licenses is several states throughout the East Coast and Mid-west.

Each member of our drilling team is experienced with a variety of drill rigs in order to better serve your needs. Here’s our equipment:

Contact us for a quote for your project.

We provide the following services:

  • Hollow Stem Auger
  • Direct Push
  • Discrete Water Sampling
  • Continuous and Discrete Soil Sampling
  • Dual Tube Sampling
  • Air Rotary
  • Permanent and Temporary Monitoring Well Installation
  • Well Pad Repairs
  • Well Redevelopment
  • Well Abandonment
  • Soft Dig Techniques
  • Low Profile Track Rig
  • Limited Access Probe Work, fits through a standard (32 inch) door with remote power unit
  • Angled Drilling Capabilities
  • Steam Cleaning
  • Remedial Systems Installations, Repair and Maintenance
  • Geotechnical Exploration
  • Environmental Exploration & Remediation
  • Water Supply Systems
  • Mineral Exploration
  • Chemical Well Rehabilitation
  • Cathodic Protection Drilling
  • MIP (Membrane Interface Probe) Exploration (click for more info)
  • IDW Free 2-Inch Well Installation
  • Borehole Survey (click for more info)
  • Auger Drilling and Split Spoon Sampling (various sizes) to 18-inch O.D. to 200 feet in depth
  • “Dry” Soil Coring 3-inch and 4-inch diameter to 200 feet depth (CME system)
  • Direct Push (Geoprobe®) Soil and Groundwater Sampling, reagent injection with track mounted 6610 DT units, and MIP exploration.
  • IDW Free 2-Inch Well Installation (GeoProbe® 8040)
  • “Punch” Soil Coring to 1,000 foot depths
  • Wireline rock coring, including triple tube and inclined to 45 degrees
  • Mud Rotary Drilling (various diameters) up to 2,000 foot depths
  • Wireline rock coring, BQ, NQ, HQ, PQ, and 6-inch size, to 1,000 foot depths, including triple tube and inclined to 45 degrees.
  • All-terrain Drilling (multiple ATV units)
  • Air Rotary/Downhole Hammer Drilling up to 1,000 foot depths; Truck and ATV Mounts
  • Undisturbed Sampling including Shelby Tube, Piston Tube, Gus and Pitcher samples, 3-inch to 5-inch capability
  • In-situ Vane Shear Testing
  • In-situ Packer Permeability Testing including conventional and transducer/data logger equipped pressure packer testing
  • Grouting/Pressure Grouting
  • Water Supply Well Drilling to 2,000 foot depths
  • Cathodic Protection Drilling
  • Complete self-contained Decontamination and Containment Services
  • Well Development and Pump Test Management and Support
  • Level A, B, C, and D Health & Safety protocol
  • Well Abandonment and Over-reaming
  • Pump Installation, Service and System Maintenance
  • Well Rehabilitation & Borehole Video
  • Marine Drilling

IET drilling team have experience in drilling wells and soil sampling at Superfund sites, underground storage tank sites, landfills, hazardous waste sites, dairies, and property transaction assessments.

Monitoring wells drilling at CTM- Alloway, NJ